ACCESORIES

TRAFFIC LIGHTS:
Is equipped with Dual traffic lights with red and green 8" diameter lenses. Weatherproof housing for indoor or outdoor use. Ready for installation, including galvanized mounting brackets. Also available in red or green single lens.

COMMERCIAL/INDUSTRIAL RADIO CONTROLS:
Remote-control transmitter can open, close, stop one door/gate.
Remote-control transmitter can open, close, stop up to three doors/gates by selecting levers A, B or C and pressing the appropriate button.
Remote-control transmitter can open, close, stop up to nine doors/gates by selecting levers 1 to 9 and pressing the appropriate button.
Remote-control transmitter can open, close, stop up to 27 doors/gates by selecting levers A, B, C, 1 to 9 and pressing the appropriate button.
Remote-control "Receiver" 24V A.C. standard, 115V A.C. optional (at an extra cost). Each door or gate requires one receiver. Can be installed with any operator that has 24V A.C. or 115V A.C. three-button control station. No modification to control wiring of existing operator is required; simply connect receiver to three-button station as per wiring diagram provided. Receiver comes in an EEMAC 1 enclosure as standard equipment.

MILLER SAFETY EDGE:
Miller safety edge is well known throughout the industry as the leading safety edge for power-operated doors and gates. This safety edge is available in both "U" shape and "T" shapeconstruction.

Momentary-contact, three-button station, surface-mounted used standard equipment, with all Doorlec operators in general purpose applications can open, close, stop door/gate/barrier.

Momentary-contact, three-button station with pilot light and key switch "off/on". Buttons will open, close, stop door/gate/barrier. Key switch will render push buttons inactive in the "off" position. Key removable in both positions.

LOOP VEHICLE DETECTOR:
The 625X loop detector is a fully transistorized, self-contained electronic unit with single channel inductive loop vehicle detection, designed for use in the access control market to provide vehicle presence information required by door/gate/barrier operators, ticket splitters, card reader, etc.

Momentary contact, surface-mounted three button station. Tamper-proof waterproof with "on/off" key switch. Buttons will open, close, stop door/gate/barrier. Key switch will render push-buttons inactive in the "off" position. Keys are removable in both positions. Recommended application: any area where high security is required.

Designed for use in rugged industrial applications. A pull on the cord from the seat of your vehicle will cause door to open or close. This switch is ideally suited for loading docks, bus garages or transport terminals. Waterproof cast aluminum housing can be installed outside and has rotating - pivoting CAM to accommodate angle of pull.

CARD READER ENTRY CONTROLS:
These controls replace key-lock devices to entranceways with a foolproof, secure lock system that cannot be duplicated like a key, using tough plastic cards with security coding.